MRUT describes a suite of techniques that permit inspecting an area between approximately 25mm to 3m from the location where the inspection is performed. MRUT can be performed on pipes, plates, rods, and components with irregular geometries. MRUT complements LRUT (Long Range UT) by covering the near field area where LRUT cannot be used with much higher resolution and detection capabilities.
Defect Detection in Railroad Wheels
Guided wave magnetostrictive sensor permits detection of surface and sub-surface defects on the tread of a stationary railroad wheel from a single point of inspection.
了解更多涂光的独立管道检查
Uses axial scanning on free-standing pipes with none or light coatings (<3-4mm) for fast and accurate defect detection around the circumference of the pipe.
了解更多Corrosion Under Pipe Support (CUPS)
Axial and/or Circumferential scanning to detect and measure corrosion under pipe supports.
了解更多无法进入的区域检查
Side inspection is used for the detection of defects in inaccessible areas up to 3m (10’) from the sensor.
了解更多