石油和天然气工业的无损检测

Uses axial scanning on free-standing pipes with none or light coatings (<3-4mm) for fast and accurate defect detection around the circumference of the pipe.

Axial and/or Circumferential scanning to detect and measure corrosion under pipe supports.

Side inspection is used for the detection of defects in inaccessible areas up to 3m (10’) from the sensor.

快速检测大多数金属材料的表面缺陷。

LRUT provides long-range inspections of pipes covering up to 100m per side (200m total). It uses the same instrument and complements MRUT for inspection of pipes at any distance.

EMAT传感器允许在大多数金属材料上进行-30ºC到650ºC的非接触和无耦合的测量。DCUT传感器对金属和非金属部件提供无耦合测量。

Measurement of bolt-load by comparing variations in ultrasonic Time-Of-Flight corresponding to changes in bolt elongation (strain). Single (SH) wave and double (SH + L) wave sensors available to meet different requirements.

Semi-automated system for thickness measurement and Hydrogen Corrosion Cracking (HCC) for boiler tube walls.

Residual stress measurement on railroad wheels, pipelines, and steel plates using custom sensors, software, and positioners.