Thickness Measurement and Flaw Detection (EMAT, DCUT)

Innerspec’s patented EMAT pulser technology and sensors permit using EMAT, DCUT, and conventional transducers from any manufacturer. EMAT sensors from Innerspec permit thickness measurement and normal beam (0⁰) flaw detection on most metallic components without contact or couplant at extreme temperatures (from -30⁰C to 650⁰C) and of rough, dirty, oxidized, and coated surfaces down to 0.3mm in thickness. DCUT sensors from Innerspec provide no-couplant measurement on both metallic and non-metallic components.

特点

EMAT

• 非接触式EMAT技术。
• 极高的精度（12.7µm-0.0005"）和横向分辨率（高达3mm-0.125"）。
• 能够在-30ºC至650ºC的温度范围内，无需主动冷却。
• Capable of inspecting metals as thin as 0.3mm (0.010”).
• 10+ sensor options for different applications.
• Roller kits, encoders, and adaptors for different applications.

DCUT

• 无耦合的压电溶液（100%干燥）。
• 极高的精度（12.7µm-0.0005"）和横向分辨率（高达1mm-0.040"）。
• Available sensor options:
  - Flexible, low-profile (2mm).
  - Remote inspection with extension pole.
  - Roller wheel.

Software Upgrades

• 厚度网格
• 厚度/腐蚀测绘